FAQs and Support

• The Quick Start Guide provided with each unit will walk you through the installation and setup step by step.
• Keep in mind that all Wave WiFi products are web-browser-based; there is no software to install.
• The only setup is connecting the product for DC power and Ethernet and connecting that to a computer or Router (Usually WiFi Router) to allow you to connect to it.

There is a Quick Start Guide with every product. Once connected as per the QSG, you should be able to open a web browser and enter the IP Address of the product.

Routers: 192.168.101.1 (Routers will not have a password unless you have set one.)

WiFi Products: 192.168.89.1 (WiFi products do not have a password to log in.)

• The Quick Start Guide provided with each unit will walk you through the installation and setup step by step.
• Keep in mind that all Wave WiFi products are web-browser-based; there is no software to install.
• The only setup is connecting the product for DC power and Ethernet and connecting that to a computer or Router (Usually WiFi Router) to allow you to connect to it.

There is a Quick Start Guide with every product. Once connected as per the QSG, you should be able to open a web browser and enter the IP Address of the product.

Routers: 192.168.101.1 (Routers will not have a password unless you have set one.)

WiFi Products: 192.168.89.1 (WiFi products do not have a password to log in.)

• The Quick Start Guide provided with each unit will walk you through the installation and setup step by step.
• If it is a “50” product with Cellular – there should be a SIM Information sheet in the box.
• There is a 116-page manual built into the router products. The product will operate by default out-of-the-box with the default configuration, or you can use advanced features to do more configuration, if necessary.

There is a Quick Start Guide with every product. Once connected as per the QSG, you should be able to open a web browser and enter the IP Address of the product.

Routers: 192.168.101.1 (Routers will not have a password unless you have set one.)

WiFi Products: 192.168.89.1 (WiFi products do not have a password to log in.)

• The Quick Start Guide provided with each unit will walk you through the installation and setup step by step.
• Keep in mind that all Wave WiFi products are web-browser-based; there is no software to install.
• The only setup is connecting the product for DC power and Ethernet and connecting that to a computer or Router (Usually WiFi Router) to allow you to connect to it.

• The Quick Start Guide provided with each unit will walk you through the installation and setup step by step.
• If it is a “50” product with Cellular – there should be a SIM Information sheet in the box.
• There is a 116-page manual built into the router products. The product will operate by default out-of-the-box with the default configuration, or you can use advanced features to do more configuration, if necessary.

There is a Quick Start Guide with every product. Once connected as per the QSG, you should be able to open a web browser and enter the IP Address of the product.

Routers: 192.168.101.1 (Routers will not have a password unless you have set one.)

WiFi Products: 192.168.89.1 (WiFi products do not have a password to log in.)