Frequently Asked Questions

Starlink can integrate directly with Wave WiFi systems as can most any other satellite system. The most affordable Starlink set ups are designed to be stationary while other more expensive models can be used while underway with various monthly price plans and limitations. Wave WiFi’s cellular and WiFi receiving systems can be used while stationary or in motion to support multiple source options. Wave WiFi’s Network Controllers (MNC’s) can host multiple active internet sources to help build a great flexible and easy to use boat network.

Yes, having backup and alternative internet sources are always a good idea. Wave WiFi systems provide a way to connect through terrestrial sources like land-based WiFi hot spots and cellular towers when Starlink or other satellite options are unavailable or too costly.

Wave WiFi routers have a host of onboard features not found in the basic Starlink router. Our routers are designed from the start to be Multi-Active WAN (Internet) Source “Management” devices designed to help you build and maintain your vessel network and Internet Sources. Our WiFi receivers and cellular receivers do an excellent job of getting you connected and keeping you connected to WiFi hotspots or Cellular towers, from further distances than you otherwise would be able to.

We recommend you get an add-on Ethernet adapter from Starlink. This allows the connection to a WAN (Internet Source) port on Wave WiFi routers. Starlink’s system will then assign IP settings automatically to that WAN port and allow it to be used as an Internet Source shared by the Router to all devices and computers on your vessel. Check if your Starlink already has an ethernet port, or if you need this adapter.

Yes, if you have one of our WiFi receivers, you can access Starlink wirelessly through their supplied router by locating it on the scan page and connecting to the Starlink hotspot. We recommend using the Ethernet connection method described previously, but either method will work. When using the Ethernet connection, you can hide Starlink’s WiFi signal through the “Ignored APs” feature on the User Interface of the WiFi receiver.